English translation for "cycles to failure"

疲劳断裂的循环次数
疲劳破坏循环
疲劳破坏周期数
疲劳损坏的循环数
无故障使用次数

Related Translations:

single failure:  单项故障

disk failure:  磁盘故障

deterioration failure:  变质失效老化形成的故障劣化失效磨损故障损坏失败退化失效逐渐恶化的故障

fatigue failure:  疲劳断裂疲劳破裂疲劳破损疲劳失效疲劳损毁；疲劳破坏

linearity failure:  线性故障

adhesion failure:  胶粘力破坏粘合破坏

failure locating:  故障定位

wedge failure:  楔型破坏楔形破坏

hardware failure:  硬件故障硬件失败

safe failure:  安全故障

Example Sentences:

	1.	Thus, for any given stress, the number of expected cycles to failure can be found . 因此，对于任何一个给定的应力，就可以求出发出破坏的预定的循环次数。
	2.	Corrosion of metal and alloys - corrosion fatigue testing - cycles to failure testing 金属和合金的腐蚀.腐蚀疲劳试验.失效试验周期
	3.	Corrosion of metals and alloys - corrosion fatigue testing - part 1 : cycles to failure testing 金属与合金的腐蚀.腐蚀疲劳试验.第1部分:失效试验周期
	4.	Zhang liji ( material physics and chemistry ) directed by professor xie xiaoming this paper is intended to solve problems for those who are designing , using pbgas . failure mechanism , as well as cycles to failure of two groups of pbga samples ( with / without underfill ) for thermal cycling conditions in the range of - 40 ~ 125 , were presented . the experiment shows that solder ball in the samples without underfill cracked after 500 times cycle , no crack was found in the underfilled samples even after 2700 cycles 通过一系列的实验，得到以下实验结果： ?在本论文设定的温度循环条件下，未充胶pbga样品的热疲劳品寿命在500周左右，充胶样品的焊点寿命高于2700周； ?对于未充胶器件，中心距( dnp )是决定焊点应力、应变大小的最主要因素，裂纹总是从中心距较大处萌生并向中心处扩展； ?温度循环的过程中焊盘附近焊料组织明显粗化。

Similar Words：

"cycles of learning" English translation, "cycles of stress revesal" English translation, "cycles per minute" English translation, "cycles per second" English translation, "cycles per secord" English translation, "cycles-to-failure" English translation, "cyclesound" English translation, "cyclest" English translation, "cyclestand" English translation, "cyclethrin" English translation